Comments:
Preparing to Drill Once the site has been selected, it must be surveyed to determine its boundaries, and environmental impact studies may be done. Lease agreements, titles and right-of way accesses for the land must be obtained and evaluated legally. For off-shore sites, legal jurisdiction must be determined. Once the legal issues have been settled, the crew goes about preparing the land: The land is cleared and leveled, and access roads may be built. Because water is used in drilling, there must be a source of water nearby. If there is no natural source, they drill a water well. They dig a reserve pit, which is used to dispose of rock cuttings and drilling mud during the drilling process, and line it with plastic to protect the environment. If the site is an ecologically sensitive area, such as a marsh or wilderness, then the cuttings and mud must be disposed offsite -- trucked away instead of placed in a pit. Once the land has been prepared, several holes must be dug to make way for the rig and the main hole. A rectangular pit, called a cellar, is dug around the location of the actual drilling hole. The cellar provides a work space around the hole, for the workers and drilling accessories. The crew then begins drilling the main hole, often with a small drill truck rather than the main rig. The first part of the hole is larger and shallower than the main portion, and is lined with a large-diameter conductor pipe. Additional holes are dug off to the side to temporarily store equipment -- when these holes are finished, the rig equipment can be brought in and set up. Setting Up the Rig Depending upon the remoteness of the drill site and its access, equipment may be transported to the site by truck, helicopter or barge. Some rigs are built on ships or barges for work on inland water where there is no foundation to support a rig (as in marshes or lakes). Once the equipment is at the site, the rig is set up. Here are the major systems of a land oil rig: Anatomy of an oil rig Power system large diesel engines - burn diesel-fuel oil to provide the main source of power electrical generators - powered by the diesel engines to provide electrical power Mechanical system - driven by electric motors hoisting system - used for lifting heavy loads; consists of a mechanical winch (drawworks) with a large steel cable spool, a block-and-tackle pulley and a receiving storage reel for the cable turntable - part of the drilling apparatus Rotating equipment - used for rotary drilling swivel - large handle that holds the weight of the drill string; allows the string to rotate and makes a pressure-tight seal on the hole kelly - four- or six-sided pipe that transfers rotary motion to the turntable and drill string turntable or rotary table - drives the rotating motion using power from electric motors drill string - consists of drill pipe (connected sections of about 30 ft / 10 m) and drill collars (larger diameter, heavier pipe that fits around the drill pipe and places weight on the drill bit) drill bit(s) - end of the drill that actually cuts up the rock; comes in many shapes and materials (tungsten carbide steel, diamond) that are specialized for various drilling tasks and rock formations Casing - large-diameter concrete pipe that lines the drill hole, prevents the hole from collapsing, and allows drilling mud to circulate Photo courtesy Institute of Petroleum Mud circulation in the hole Circulation system - pumps drilling mud (mixture of water, clay, weighting material and chemicals, used to lift rock cuttings from the drill bit to the surface) under pressure through the kelly, rotary table, drill pipes and drill collars pump - sucks mud from the mud pits and pumps it to the drilling apparatus pipes and hoses - connects pump to drilling apparatus mud-return line - returns mud from hole shale shaker - shaker/sieve that separates rock cuttings from the mud shale slide - conveys cuttings to the reserve pit reserve pit - collects rock cuttings separated from the mud mud pits - where drilling mud is mixed and recycled mud-mixing hopper - where new mud is mixed and then sent to the mud pits Drill-mud circulation system Derrick - support structure that holds the drilling apparatus; tall enough to allow new sections of drill pipe to be added to the drilling apparatus as drilling progresses Blowout preventer - high-pressure valves (located under the land rig or on the sea floor) that seal the high-pressure drill lines and relieve pressure when necessary to prevent a blowout (uncontrolled gush of gas or oil to the surface, often associated with fire)

Comments:
ÞÜÜÜã ÃäÊ æãÜÜæÞÜÜÚÜÜß Ãáí ãÜÜËÜÜá æÌÜÜåÜÜß.... ÞÜÜÇá ãÜÜæÞÜÜÚ ÞÜÜÇá ÑæÍ ÏæÑ áß ÈÑãÜÜíá ÒÈÇáå ÃÝÜÜÖÜÜá áß

Comments:
ÃÎÜÜæÇäí ÃáÓÜÜáÇã ÚÜÜáíßã æÑÍÜÜãÊ Çááå æÈÑßÇÊå æÈÜÜÚÜÜÏ ÃÔÜÜßÑßÜÜã ÌÜÜãíÜÜÚÇ ÚÜÜáì ÇáÚÜÜÈÇÑÇÊ æÇáÚÜÜæÇØÜÜÝ ÇáÝíÇÐå æÇÔÜÜßÑ ÍÜÜÓÜÜä ÊÜÜÝÜÜåãÜÜßã áÇäÔÜÜÇÁ åÜÜÐì ÇáãÜÜæÞÜÜÚ ÊÜÜÍíÇÊí ááÌÜÜãíÜÜÚ æÇÊãÜÜäì Ãä ÃÞÜÜÏã ÇáÇßÜÜËÑ æÇáÇßÜÜËÑ áåÜÜÐå ÇáÇãÜÜå æÇä ÃÊÜÜãÜÜßä ãä äÜÜÞá ÇáÊÜÜßäÜÜæáæÌÜÜíÇ ÇáÚÜÜáãíÜÜå æÊÜÜØÜÜæíÑåÇ ÈÊÜÜßÇÊÜÜÝÜÜßã æãÜÜÔÜÜæÑÇÊÜÜßã ÈÇáäÓÜÜÈÜÜå ááÇÎ ÇáÐí ÈÜÜÚÜÜË áí ÈÇáÈÑíÏ áãÜÜÚÑÝÜÜÉ ØÜÜÑíÜÜÉ ãÜÜÚÜÜÑÝÜÜÉ ÃÓÜÜãÇÁ ãÜÜæÇÏ ÇáØÜÜíä MUD ÃÞÜÜæá ÃÎÜÜí ÇáÚÜÜÒíÒ ÈÜÜÚÜÜÏ ÇáÖÜÜÛÜÜØ ÚÜÜáì ÇáÑÇÈÜÜØ ÓÜÜæÝ ÊÜÜÌÜÜÏ ßÜÜáãÜÜÉ number æÇãÇãÜÜåÇ ÃÍÜÜÑÝ ÃÈÜÜÌÜÜÏíÜÜå ABCDEFJ.......¿ ÃÖÜÜÛÜÜØ ÚÜÜáì ÇáÍÜÜÑÝ ÇáÐí íÈÜÜÏÇÁ ÈÜÜå ÃÓÜÜã ÇáãÇÏå ÇáßíãíÇÆíå ÇáÊí ÊÜÜÈÜÜÍÜÜË ÚÜÜäÜÜåÇ

Comments:
ahmed relly nice site...i hope to help you to improve this site, but i do not know how to send you more information about well-controll..congratualition Balushi...

Comments:
ÃÎÜÜæí ÚÜÜáì ÝÜÜßÑå ÇäÇ ÒÑÉ ãÜÜæÞÜÜÚÜÜß ÇáËÇäí åÜÜÐì http://www.watein.com/gbook/gbook.php?UserID=67 ÇáÕÜÜÑÇÍÜÜå ÇãÓÜÜßÜÜÊ æÓÜÜÌáÉ Ýí ãäÊÜÜÏÇß åÜÜÐì http://www.albalush.com/ Çæ åÜÜÐì http://www.albalush.com/vb ßÜÜáß ÚÜÜÓÜÜá ÊÜÜÐßÜÜÑ ÃíÇã ÊäÜÜÇÌíÈ ßÜÜáåÇ íÜÜæãíä æÒæá ÇáÎÜÜØÜÜÑ ÍÜÜÑßÇÊ áÇ ßÜÜäÜÜåÇ ÚÜÜÓÜÜá íÇ ÚÜÜÓÜÜá ÊÜÜÍíÇÊí ÃÎÜÜæß ÓÜÜÚÜÜÏ ÇáÇãä ÇáÕÜÜäÇÚÜÜí

Comments:
waoooooooooo balushi.... Nice Job